Home35x12.50R20 in metric

35x12.50R20 in metric

A 35x12.50R20 is 889.0 mm tall and 317.5 mm wide on a 20 in wheel: its nominal 35.00 by 12.50 in, converted. Each sidewall works out at 190.5 mm (7.50 in).

By David Owen. Published 3 November 2026.

in, mphmm, km/h

These are size-code figures only. Whether a size fits, clears and carries your load depends on your vehicle and the tire, so check with a tire shop.

Flotation sizes state their height and width in inches, and those numbers are nominal: makers aim at them, and real tires of the same size measure a little differently.

Makers' own measured figures for this size run 34.5 to 35.04 in tall and 592 to 602 revolutions per mile (calculated: 576). The calculated figures come from the size code alone; real tires vary by brand and tread design.

Closest metric sizes

The metric sizes on a 20 in wheel closest to its nominal 35.00 in by calculated diameter are 295/65R20 (35.10 in), 315/60R20 (34.88 in) and 325/60R20 (35.35 in). That compares heights only; widths differ.

See every 35-inch tire in metric.

Searched comparisons with the 35x12.50R20

Diameter change is the second size against the first, as each comparison is searched.

Compare the 35x12.50R20 with any size in the calculator